164/140 Automatic Transmision Question

Hello Group,

Does anyone know if a B-W 35, (M35 in volvo speak), from a 140 will fit
a 164 that was also equipped with a BW 35?

THanks,
george.

 

If I remember well, it will fit without any problems.

Dirk

 

thanks, just trying to confirm this before getting the wrenches out. the
factor is the output shaft, and its details.

george

 

afaik the 164 version is a lot stronger internally, and with a bigger
pan, bigger torqueconverter...

 

Use the bell housing from 164 and all will be so good! Bill

 

Didn't the 164 use a BW-55?
--






http://www.albany.net/~mjc1/index.html

 

Generally you can use this rule of thumb - pushrod motor = BW35,
overhead cam = BW55 or AWxx. There were a few B20/BW55 and B21/BW35
combos produced in '76 and '77, but none sold in US/Canada.

--
Mike F.
Thornhill (near Toronto), Ont.

Replace tt with t (twice!) and remove parentheses to email me directly.
(But I check the newsgroup more often than this email address.)

 

Thanks to All.

George