1988 740 washers

Discussion in 'Volvo 740' started by noreply@invalid, Sep 29, 2004.

  1. 1988 740 Estate

    I have a problem with the windscreen washer rubber line where it joins the T
    valve line where it splits for each washer unit.

    The red button on the top is allowing water to spurt out not getting to the
    washer units.

    Is this a faulty valve or is it something else causing this fault.
     
    noreply@invalid, Sep 29, 2004
    #1
  2. noreply@invalid

    Ken Phillips Guest

    The T-piece is also a non-return valve which has a small spring loaded
    rubber diaphragm in it, water escaping from that little hole indicates the
    diaphragm is perished and the t-piece needs to be replaced, beware, if you
    replace it with a standard t-piece you will also need to install a one way
    valve upstream of the t-piece, otherwise you will get a very delayed
    response from the squirters every time you use them.

    TTFN
    Ken Phillips
     
    Ken Phillips, Sep 30, 2004
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.