242 window trim

Discussion in 'Volvo 240' started by James Sweet, Feb 16, 2007.

  1. James Sweet

    James Sweet Guest

    As anyone who owns one knows, finding 242 specific parts in good
    condition is getting more and more difficult as these cars get older and
    older. Does anyone make rubber window wiper trim? I'm talking about the
    stuff along the top edge of the door which keeps water and debris from
    going down inside the door. Mine is getting hard and brittle to the
    point that it's very uncomfortable to rest my arm on the sill with the
    window open. Perhaps someone sells rolls of the rubber extrusion that
    could be used to replace the originals?
     
    James Sweet, Feb 16, 2007
    #1
  2. James Sweet

    Don Hodgdon Guest

    Check out this thread on the Turbobricks Forum:
    http://forums.turbobricks.com/showthread.php?t=83443

    Don
     
    Don Hodgdon, Feb 16, 2007
    #2
  3. James Sweet

    James Sweet Guest

    James Sweet, Feb 17, 2007
    #3
  4. James Sweet

    Don Hodgdon Guest


    James,

    Sorry I didn't get back to you sooner, I'm trying to get the Alfa ready for
    a show this weekend and haven't been online much.

    Here is a copy of the post on the T-Bricks site with a link to his website,
    it should be all the info you need. I have no vested interest in this
    product.

    Hope this helps,.

    Don

    We have just paid to have 240 outside window scrapers made. They are being
    copied exactly from a NOS window scraper I had. We are assured that with
    todays rubber technology, we will be able to offer a LIFETIME WARRANTY on
    them and will do so. The company making these for us also makes window
    scrapers for large car manufacturers, so these are the real deal and not
    some cheap low volume low quality parts.

    240 window scrapers are no longer available from the dealer and the last
    time they were available, they were around $100 EACH window. With ours you
    will be able to re-seal your entire car for less than $100! Each set will
    contain both left and right proper length outside window scrapers for your
    specified model. Each set is for the outside window scraper rubber only, you
    will use your old metal trim and installation is easy and straightforward.

    There is a big expense for tooling and the minimum amount of material
    required to have window scrapers made is quite large. So to offset some of
    our initial cost we are going to offer the first 50 sets at an introductory
    price of $60.00 a set for 2 doors and $65.00 a set for 4 doors and wagons.
    This price includes shipping to anywhere in the US or Canada. Shipping to
    other countries available at additional cost. However, at the introductory
    price, price will be the same whether you buy 1 set or several sets. After
    the first 50 sets, prices will be set at $80.00 a set for 2 doors and $90.00
    a set for 4 doors and wagons.

    Feb. 1st Update: Unexpected delays have pushed estimated delivery date to
    the middle of March. Our apologies for any inconvenience.

    Paypal address is
    Mailing address is:
    R-Sport International
    4334 NE 85TH Ave.
    Portland, OR 97220

    Please specify your forum user name, full name, shipping address and which
    model you have.

    All information pertaining to this sale is listed here:
    http://www.r-sportinternational.com/scrapers.htm
     
    Don Hodgdon, Feb 21, 2007
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.