245 gaz pump problem

Discussion in 'Volvo 240' started by jocelyn pinet, Nov 1, 2003.

  1. jocelyn pinet

    jocelyn pinet Guest

    Hi! Here's my problem. 1989 245, auto. Changed pump underfloor and gaz
    filter. Replaced sender in tank with rebuilt unit. Gaz not getting to
    engine. If I connect fuse #4 for in-tank pump to fuse #6 for underside
    pump, underside pump turns. Otherwise not. Question 1: Should I hear the
    underside pump turn when key is on?
    Question 2: How can I check if the in-tank pump is working.
    Any advise greatly appreciated!
    Thanks.
    J.P.
     
    jocelyn pinet, Nov 1, 2003
    #1
  2. jocelyn pinet

    James Sweet Guest

    You should be able to hear the in-tank pump if you stick your ear to the
    tank with the car on jack stands and have someone crank the engine or hold
    the relay closed with the cover off. The pumps should run while the engine
    is cranking, but not when the key is just on. Check the relay, it's a white
    box tucked up under the right side footwell, often the soldering cracks on
    the circuit board inside.
     
    James Sweet, Nov 1, 2003
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Power steering pump bracket (W/O AC) cracked on a 83 245

  2. 83' 245 oil pressure problem

  3. cold idle problem, 1993 245

  4. 245 Speedometer problem (other end this time)

  5. Stalling problems -- what's more likely to fail -- fuel pump relay or fuel pump

  6. 1990 245 oil leak problem

  7. Fuel pump question ['83 245]

  8. 240 (1991) Fuel pump / pre-pump

Loading...