740 -92 failed to start. Should I replace the IAC?

Discussion in 'Volvo 740' started by B Persson, Feb 4, 2006.

  1. B Persson

    B Persson Guest

    740 -92 Rex/Regina B230F failed to start today. It nearly made it
    but no idle. The Codes said 2 2 3. (IAC problem). Took it off and
    sprayed some carb cleaner into it. Cleaned up the connections too.
    Then it started ok.
    Dont know much about IAC:s but I'm wondering...
    Do they wear out?
    Should I buy a new one?

    Many thanks,
    Bengt P
     
    B Persson, Feb 4, 2006
    #1
  2. B Persson

    Peter K L Milnes Guest

    Just try thoroughly cleaning it and it's connections along with the whole of
    the inlet tract (air filter to manifold) every two years.

    All the best, Peter.

    700/900/90 Register Keeper,
    Volvo Owners Club (UK).
     
    Peter K L Milnes, Feb 5, 2006
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. 740 Turbo no start / no jump start / battery n fuses ok

  2. Failed Ontario emission,high HC/CO,low NO.O2 sensor? which brand best?90 740 GL

  3. Where to buy IAC valve for Volvo 740

  4. 240dl: where should the temperature arrow be pointing at?

  5. Bypassing the IAC in a Volvo 740

  6. We decided to do the stupid and replace the heater blower fan a 85 240 wagon.

  7. Failed Emissions with a Volvo 1988 740 GLE Non-Turbo in MD!!

  8. Update on my update of 93 240 that failed the emissions test in Ontario

Loading...