Broken mount for driver's side mirror

Discussion in 'General Motoring' started by jtaylor, Mar 14, 2005.

  1. jtaylor

    jtaylor Guest

    It got hit about 2 years ago and finally broke yesterday.

    The mirror is ok, just the casting where it attaches to the window (740
    Turbo wagon).

    A quick look does not tell me how to get it off - do I need to take the
    door apart?

    Can I get just that casting, or do I have to buy the whole mirror?
     
    jtaylor, Mar 14, 2005
    #1
  2. jtaylor

    ~^ beancounter ~^ Guest

    i think you remove the interior plate, then you will see the access to
    the screws/bolts that hold the mirror onto the door...remove from
    inside...

    eBay is where i found all of my mirrors.....
     
    ~^ beancounter ~^, Mar 14, 2005
    #2
  3. jtaylor

    Mike F Guest

    The bolts are behind the little triangle on the inside the door. The
    door panel needs to be removed to unplug the electrical, though. And
    the base casting is not available separately, you need to buy the whole
    mirror assembly.

    --
    Mike F.
    Thornhill (near Toronto), Ont.

    Replace tt with t (twice!) and remove parentheses to email me directly.
    (But I check the newsgroup more often than this email address.)
     
    Mike F, Mar 14, 2005
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Side mirror defrost and seat heating

  2. Broken K-Jet Fuel Distributor mount - seats

  3. 960 driver door stop broken

  4. 1989 Volvo Turbo 760: electric seat control on the driver's seat broken

  5. source for Seat Cables '97 960 driver's side.

  6. A/C cold driver side, hot pass. side. '96 850

Loading...