Chrome exhaust finisher 1999 Volvo S70...

Discussion in 'Volvo S70' started by Jabber, Aug 27, 2006.

  1. Jabber

    Jabber Guest

    All,
    I have ordered a new exhaust tip for my car as the existing one is
    falling apart. It's original so I think it's time for replacement. I
    see there is a single bolt on the bottom and I'm wondering if it's as
    easy as removing this to get the old tip off. Things are pretty rusty
    so it might be interesting... I appreciate all the help!


    Jordan 1999 S70.
     
    Jabber, Aug 27, 2006
    #1
  2. Jabber

    Tim \(remove obvious\) Guest

    Yes this single bolt secures it, however the steel exhaust will have rusted
    inside the old chrome finisher which will be holding it fast.

    You'll probably need to use an angle grinder and slide up the old finisher
    without going so deep you cut into the steel pipe, so the finisher can be
    expanded to release its grip.

    Tim..
     
    Tim \(remove obvious\), Aug 28, 2006
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. 1999 S70 Electronic Throttle Contol System Problem

  2. 1999 S70

  3. AUTOTRADER Volvo 1999 S70

  4. Gear shifting with a Volvo S70 T5 1999 with 5 speed manual

  5. V70 CHROME WHEEL BOLTS FOR T5 WANTED

  6. 1999 V70 R exhaust (trivia) question...

  7. 1999 s70 Volvo Center Counsel Trim

  8. 1999 S70 Volvo Center Counsel Trim

Loading...