Cold start injector - B230E 740

Discussion in 'Volvo 740' started by Mungo \two sheds\ Toadfoot, Oct 5, 2005.

  1. Mungo \two sheds\ Toadfoot

    Mungo \two sheds\ Toadfoot Guest

    Where is it?

    My Haynes manual goes into great detail about removing and testing it but
    doesn't mention where it is!

    Thanks,

    Si
     
    Mungo \two sheds\ Toadfoot, Oct 5, 2005
    #1
  2. Mungo \two sheds\ Toadfoot

    Randy G. Guest

    Underside of the intake manifold, before it separates towards the
    individual cylinders....?


    __ __
    Randy & \ \/ /alerie's
    \__/olvos
    '90 245 Estate - '93 965 Estate
    "Shelby" & "Kate"
     
    Randy G., Oct 5, 2005
    #2
  3. Mungo \two sheds\ Toadfoot

    Mungo \two sheds\ Toadfoot Guest

    That would make sense :)

    I haven't looked at the car yet, just the manual. There are, of course, no
    pictures of the offending item.

    Si
     
    Mungo \two sheds\ Toadfoot, Oct 5, 2005
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. 86 240 DL cold start injector failure symptoms

  2. Recently acquired 1989 740/B230E rough starting

  3. volvo 1990 740 B230E fuel injection engine...non starter

  4. Starting problem - 1989 740 B230E

  5. B230E injector bolts

  6. 1987 Volvo 740 GLE (B230E)

  7. 89 240 - testing cold start injector?

  8. Cold start injector

Loading...