Engine Wiring Harness

Discussion in 'General Motoring' started by jamiebabineaux, Mar 1, 2006.

  1. jamiebabineaux

    jamiebabineaux Guest

    I have to give kudos to Dave Barton. I ordered my wiring harness for my
    87 GLE (B230F) on Friday and it arrived on Monday. That's fast!

    Dave communicated perfectly, was most helpful and although I have not
    yet installed the harness, I am VERY pleased with his service and
    prices.

    That being said, I now know 2 things - if I ever need to be glued to
    something like an airplane seat in a stunt plane so I won't fall out, I
    want it to be the glue they used on my winshield in 1987. That was some
    TOUGH STUFF.

    If I ever go to the electric chair to be electrocuted- I want the chair
    to be wired with an original engine harness from a 1987 Volvo. Then I
    know it won't work!

    LOL
     
    jamiebabineaux, Mar 1, 2006
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. 1985 Volvo 240 no spark - checking engine wiring harness ?

  2. FS: Used LH 2.0 wiring harness - with ECU, AMM as bonus

  3. 1980 DL broken wire at wiring harness connector makes car difficult to start

  4. Engine wiring harness replacement 1980 245

  5. replacing a tailgate wiring harness--illustrated procedure and tips

  6. Engine Rebuild and New Wiring Harness -- Transmission Problem!

Loading...