How to change my Overdrive Solenoid

Discussion in 'General Motoring' started by jjmoss77, Sep 13, 2007.

  1. jjmoss77

    jjmoss77 Guest

    I have a 1982 volvo 240 turbo, and my overdrive soleniod went out. I changed
    the relay, and that didn't work. Does anyone know how to change the soleniod?
    Thanks
     
    jjmoss77, Sep 13, 2007
    #1
  2. jjmoss77

    James Sweet Guest

    Depends, is the car an automatic or manual?

    I've never seen a solenoid fail except for one that was leaking. Make sure
    you check all the wiring first, that's far more common to break.
     
    James Sweet, Sep 13, 2007
    #2
  3. jjmoss77

    Roadie Guest

    I'm assuming this is a manual transmission with the Laycock OD unit.
    Check the OD switch and wiring running down the shifter.
     
    Roadie, Sep 13, 2007
    #3
  4. jjmoss77

    Simon Page Guest

    Disconect the wires and unscrew it from the overdrive case. Although
    the elctronics rarely fail, if you have never changed the transmission
    fluid it could be sticking.
     
    Simon Page, Sep 15, 2007
    #4
  5. jjmoss77

    nobodys Guest

    nobodys, Sep 29, 2007
    #5
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.