how to start a 940lpt

Discussion in 'Volvo 940' started by Stephan, Jul 9, 2004.

  1. Stephan

    Stephan Guest

    My 940 with a 230FK engine starts bad. It needs to much throtle.

    What is the normal procedure to start a 230FK engine?

    Stephan 940/'97
     
    Stephan, Jul 9, 2004
    #1
  2. Stephan

    Tony Stanley Guest

    All injection cars should start themselves without any throttle. Needing
    throttle would indicate a fault, possibly with the cold start injector,
    throttle sensor, or ignition.
     
    Tony Stanley, Jul 10, 2004
    #2
  3. Stephan

    Peter Milnes Guest

    Just get in to the car and turn the starter key till it fires. There is no need
    to depress the accelerator pedal. The cold start mixture is automatically set
    when engine is cold. Check the cold start injector circuitry if that fails to
    get engine going satisfactorily.Usually the engine temp sensor for the ECU has
    problems.

    Cheers, Peter.

    : My 940 with a 230FK engine starts bad. It needs to much throtle.
    :
    : What is the normal procedure to start a 230FK engine?
    :
    : Stephan 940/'97
    :
    :
     
    Peter Milnes, Jul 10, 2004
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.