power seat issues

Discussion in 'General Motoring' started by luckguy1586, May 8, 2006.

  1. luckguy1586

    luckguy1586 Guest

    the drivers seat in my 850 is reclinded and will not return to the upright position. Anyone have any ideas why? I can heAR THE MOTOR runn when I activate the switch to bring it up
     
    luckguy1586, May 8, 2006
    #1
  2. luckguy1586

    Mike F Guest

    Probably a problem with the drive cable. See:
    http://www.volvospeed.com/Repair/seatcable1.php
    You can fix this without replacing the cable. After removing the upper
    end from the motor, pull the inner cable out. Heat the metal end of the
    outer with a heat gun and pull it off. Cut 5 - 10 mm from the plastic
    outer, then reinstall the metal end. Slide the inner back in and
    reattach.

    --
    Mike F.
    Thornhill (near Toronto), Ont.

    Replace tt with t (twice!) and remove parentheses to email me directly.
    (But I check the newsgroup more often than this email address.)
     
    Mike F, May 9, 2006
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.