removing windshield washer nozzle

Discussion in 'General Motoring' started by doofy, Jun 7, 2007.

  1. doofy

    doofy Guest

    I've got a 91 740 wagon. My right windshield washer nozzle always seems
    to be the one to plug up. How do I get them out? I want to try to soak
    it in vinegar or something, to see if I can dissolve the mineral
    deposits, or whatever is clogging it.
     
    doofy, Jun 7, 2007
    #1
  2. doofy

    don hodgdon Guest

    The nozzles have plastic tabs that hold them in place. If you can get under
    them with a pair of needle nose pliers, you might be able to squeeze the
    tabs enough to get the nozzle out without breaking it.

    The nozzles are so cheap that I usually just rip them out and replace with a
    new one.

    HTH,

    Don
     
    don hodgdon, Jun 11, 2007
    #2
  3. doofy

    John Robertson Guest

    put a fish tank filter on the line when you clean out the nozzle as well
    flush out the water washer tank often .
     
    John Robertson, Jun 12, 2007
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Removing Steering Wheel Pad when Air Bag (SRS) equipped.

  2. Removing stereo from 940 GLE

  3. Removing window decals

  4. Windshield washer nozzle replacement (how ?)

  5. Removing 740 pillar trim

  6. 850 windshield washer check valve cleaning

  7. 940 windshield washer tank removal?

  8. windshield washer pump

Loading...