Turbo Timer Installation

Discussion in 'General Motoring' started by Norbert, Sep 14, 2004.

  1. Norbert

    Norbert Guest

    I was given a used but working FIZZ turbo timer which I want to install on
    my 92' 760 Turbo, unfortunately I do not have the installation instructions.
    I tried searching the net for it but with absolutely no luck. Does anyone
    have any knowledge in installing these. There are only 3 wires so I can't
    see it to be that difficult.

    Thanks in advance,

    Norbert
     
    Norbert, Sep 14, 2004
    #1
  2. Norbert

    Grantdixon Guest

    hey,

    i got a cheap turbo timer and it has three wires aswell
    there is

    red - Battery +
    Black - Battery -
    Yellow - Ignition

    pull apart the steering coloum and find the wire that is the ignition
    solder the yellow(ignition) from the turbo timer to that and bam you have
    a goa

    cheers
     
    Grantdixon, Oct 9, 2004
    #2
  3. Norbert

    Grantdixon Guest

    hey,

    i got a cheap turbo timer and it has three wires aswell
    there is

    red - Battery +
    Black - Battery -
    Yellow - Ignition

    pull apart the steering coloum and find the wire that is the ignition
    solder the yellow(ignition) from the turbo timer to that and bam you have
    a goa

    cheers
     
    Grantdixon, Oct 9, 2004
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.